--- On Mon, 7/6/10, naveen nischal <address@hidden> wrote:
From: naveen nischal <address@hidden> Subject: Fw: Re: [Discuss-gnuradio] problem with tvrx , wbx and AO-51. To: address@hidden Date: Monday, 7 June, 2010, 10:22 PM
--- On Mon, 7/6/10, naveen nischal <address@hidden> wrote:
From: naveen nischal <address@hidden> Subject: Re: [Discuss-gnuradio] problem with tvrx , wbx and AO-51. To:
"Patrik Tast" <address@hidden> Date: Monday, 7 June, 2010, 10:20 PM
Hi Patrik,
Thanks for the reply. I have been using the usrp_wbfm_rcv.py receiver found in the examples directory. and the antenna is a YA450-14.7-24 i have attached a picture of the antenna. Should I be using a broadband preamp or can i do without it? Do you find any problem with what i have been doing?
Thanks & Regards, Naveen. --- On Sat, 5/6/10, Patrik Tast <address@hidden> wrote: From: Patrik Tast <address@hidden> Subject: Re: [Discuss-gnuradio] problem with tvrx , wbx and AO-51. To: "naveen nischal" <address@hidden>, address@hidden Date: Saturday, 5 June, 2010, 1:48 PM
Hi Naveen,
Which receiver are you using? I use the usrp_nbfm_rcv.py
receiver found in the examples directory
What antenna are you using?
Patrik
----- Original Message -----
Sent: Saturday, June 05, 2010 0:49
Subject: [Discuss-gnuradio] problem with
tvrx , wbx and AO-51.
Hi,
I have recently got into doing the SDR, i have been using the both
the tvrx and wbx daughter boards for communicating with the ham radio at
435.300Mhz. I am not too good at python so i use GRC. However when i try
to receive from the voice from the AO-51 satellite at the same 435.3Mhz
frequency i dont get anything. Any comments or suggestions are
appreciated.
Thanks & Regards,
Naveen |
_______________________________________________ Discuss-gnuradio
mailing
list address@hidden http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
|
|
|