[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] About EEPROM and FX2(68013a) USB interface in US
From: |
Liang Xin 梁昕 |
Subject: |
Re: [Discuss-gnuradio] About EEPROM and FX2(68013a) USB interface in USRP |
Date: |
Tue, 13 Apr 2010 09:23:08 +0800 |
Thank you very much, Eric!
I konw it is the USB issue, and I am really a greenhand in this area. I have learned how to change PID/VID via EEPROM and how to burn program in it now.
And my question is which source code is the content of the EEPROM in gnuradio, that I can burn it in? it should be a data file in the package, right?
Thank you again!
BR
Sindy
2010/4/13, Eric Blossom <address@hidden>:
On Mon, Apr 12, 2010 at 04:02:43PM +0800, Liang Xin 梁昕 wrote:
> Hi All
>
> I am developing a board with gnuradio which is like USRP. It is also use
> FX2LP(CY7C68013a) and AD9862, and I add some surroundings.
>
> I hope that my board can work well with gnuradio, but it seems like it can
> only support USRP now. So could you please give me some help, if I want to
> run gnuradio on my board. How should I do with it?
>
> Now I do some test with my board.
> ----------------------------------------------
>
> When I plug the board to host and run command : lsusb
> the information list as below:
>
> Bus 002 Device 003: ID 0b4:8613 Cypress Semiconductor corp. CY7C68013 EZ-USB
> FX2 USB 2.0 Development Kit
>
> When I plug the USRP it shows
> Bus 002 Device 003: ID 0xfffe:0x0002
>
> My board is recognized by PC, but VID and PID is different from USRP.
> What's the problem with it?
> It means the driver(s) is not correct? Or I should change something in the
> source or head file?
>
> PS: I don't configuration EEPROM with CY7C68013a now. Does this cause some
> issues? Should I leave it blank? If not, what and how should I burn in it?
Your questions reveal that you don't know have much of an
understanding of USB. If you hope to create a USB based device,
you should probably spend some time studying the USB 2.0 specs.
Eric