[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] ATSC receiving/demodulation/decoding
From: |
Stephen Branch |
Subject: |
[Discuss-gnuradio] ATSC receiving/demodulation/decoding |
Date: |
Mon, 12 Apr 2010 17:09:54 -0500 |
This is Auburn University's Software Defined Radio Senior Design Team,
Our goals are to receive and output FM Radio (which we currently have working)
and also to Receive, Decode, and Display HDTV through SDR.
We have a USRP1, USRP2, a WBX and a TVRX card, using any combination of this
hardware, what would be the best way to receive and decode atsc signals so we
can watch hdtv?
Some other questions we have:
What is the current state of ATSC decoding to watch HDTV?
How close to real time can be achieved with the USRP2?
For the ATSC part of our project we have been adhering closely to the Readme
File found in /gnuradio/gr-atsc/src/python.
As far as the results after following the process mentioned in the Readme:
Our problems are similar to those I have seen a few posts on the mailing list
for already with no replies.
The output file is empty.
Pipe 5 never seems to get any data.
And there is a taps.txt file created which is also empty.
We have implemented the suggestions from previous posts to similar problems:
We have verified the output of usrp_fft.py as I have seen mentioned.
We have tried with latest distributions of LINUX and GNU Radio.
- Ubuntu v.9.10 w/ reiserfs, and then after seeing a post on the mailing-list
we switched to using xfs
- GnuRadio v.3.2.2
- and the git on the bleeding edge of GnuRadio
We have tried using both the USRP1 and the USRP2 but with the same problems.
Thanks,
Stephen Branch and Bobby Black
address@hidden
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] ATSC receiving/demodulation/decoding,
Stephen Branch <=