[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Discuss-gnuradio] Unable to tune Tx or Rx with XCVR2450 on USRP2
From: |
Jeff Brower |
Subject: |
RE: [Discuss-gnuradio] Unable to tune Tx or Rx with XCVR2450 on USRP2 |
Date: |
Wed, 3 Feb 2010 08:55:30 -0600 (CST) |
User-agent: |
SquirrelMail/1.4.2-1 |
Ian-
> Perhaps? We only have two USRP2s and 2 XCVR2450s. However,
> if it was the SD card, I would think both XCVR2450s should
> have the problem. Actually, even the better of the two
> occasionally fails, so I can't be sure.
If you rule out the SD card, then is there a way you and Manav can compare PCB
revisions for USRP2 and XCVR2450 -- and
USRP2 logic revision -- and make sure your systems are absolutely identical?
Even a small rework or logic change
might make a difference...
-Jeff
>>Ya, what I mean is that for you too the problem may be the SD card only.
>>>Actually we had got around 20
>> USRP's/daughterboards from Ettus and none of >them were working with the SD
>> cards they supplied with them (20 in
>> all). >When I tried with an older SD card, it worked.
>>On Tue, Feb 2, 2010 at 5:43 PM, Ian Holland <address@hidden> >wrote:
- RE: [Discuss-gnuradio] Unable to tune Tx or Rx with XCVR2450 on USRP2, Ian Holland, 2010/02/01
- RE: [Discuss-gnuradio] Unable to tune Tx or Rx with XCVR2450 on USRP2, Ian Holland, 2010/02/03
- RE: [Discuss-gnuradio] Unable to tune Tx or Rx with XCVR2450 on USRP2, Ian Holland, 2010/02/03
- Re: [Discuss-gnuradio] Unable to tune Tx or Rx with XCVR2450 on USRP2, Matt Ettus, 2010/02/04
- RE: [Discuss-gnuradio] Unable to tune Tx or Rx with XCVR2450 on USRP2, Ian Holland, 2010/02/04
- Re: [Discuss-gnuradio] Unable to tune Tx or Rx with XCVR2450 on USRP2, Matt Ettus, 2010/02/04
- RE: [Discuss-gnuradio] Unable to tune Tx or Rx with XCVR2450 on USRP2, Ian Holland, 2010/02/04
- RE: [Discuss-gnuradio] Unable to tune Tx or Rx with XCVR2450 on USRP2, Ian Holland, 2010/02/04