[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Re: usrp2 with atl1e gigabit ethernet device
From: |
Christopher Friedt |
Subject: |
Re: [Discuss-gnuradio] Re: usrp2 with atl1e gigabit ethernet device |
Date: |
Thu, 19 Nov 2009 18:56:48 +0100 |
Hi Stefan,
On Thu, Nov 19, 2009 at 4:30 PM, Stefan Brüns
<address@hidden> wrote:
> 2) ethtool eth0
exactly - that's the last thing I checked, and it reported that only
10/100 Mbps was supported with my card (I thought that was especially
weird for a gbe card). Then I checked the kernel source and found the
atl1e module also handles atl2 rev A/B cards and realized that lspci
was talking smack.
> 3) lspci -v
lspci was what misinformed me in the first place :P (i.e. pci_ids has
some incorrect values for attansic cards). My card is not an ATL1[e],
but rather an ATL2[e] - I have no idea why lspci reported the wrong
device.
Thanks for your reply,
Chris