[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] ztex USB-FPGA board
From: |
Luke Kenneth Casson Leighton |
Subject: |
[Discuss-gnuradio] ztex USB-FPGA board |
Date: |
Sun, 1 Nov 2009 13:26:15 +0000 |
http://shop.ztex.de/product_info.php?cPath=21&products_id=28
dear gnuradio developers,
i was searching on opencores.org to see if there was a SoC that
incorporates an FPGA(-like) device with an open core, and i
accidentally encountered the above USB-FPGA board. it has a Cypress
CY7C68013A/14A 480mb/s USB-2 Microcontroller and a Xilinx Spartan-3
XC3S400 FPGA. it is also accompanied by a developer board:
http://www.ztex.de/usb-fpga-1/exp-1.1.e.html
the price for the USB-FPGA is an incredibly-low $EUR 70, and the
developer board is only $20.
so my primary question is: is this USB-FPGA board (apart from the
issue of connecting to A-D / D-A boards) suitable for use to do an
802.11b transceiver? is it fast enough?
many thanks,
l.
- [Discuss-gnuradio] ztex USB-FPGA board,
Luke Kenneth Casson Leighton <=