[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] USRP / LFTX controlling I/O pins
From: |
Faschingbauer, Alexander |
Subject: |
[Discuss-gnuradio] USRP / LFTX controlling I/O pins |
Date: |
Thu, 24 Sep 2009 22:15:23 +0200 |
Hello,
the following code snippet is part of a runnable python script.
I want to control some or one of the I/O pins on the USRP / LFTX board but I
can't measure any changes on the USRP / LFTX io_pins by using the following
code snippet.
Could somebody give me a hint please what to do ?
I'm not sure especially about the "#not sure" commented lines...
...
u = usrp.sink_c(0,usrp_interp)
tx_subdev_spec = usrp.pick_tx_subdevice(u)
m = usrp.determine_tx_mux_value(u, tx_subdev_spec)
print "mux = %#04x" % (m,)
u.set_mux(m)
subdev = usrp.selected_subdev(u, tx_subdev_spec)
print "Using TX d'board %s" % (subdev.side_and_name(),)
u.set_tx_freq (1, cordic_freq)
u.set_pga(0,0)
print "Actual frequency: ",u.tx_freq(1)
subdev.set_enable(True)
subdev.set_auto_tr(True) # enable auto T/R
u.write_atr_mask(1, 21) #not sure
u.write_atr_txval(1, 21) #not sure
u.write_atr_rxval(1, 21) #not sure
...
Thank' s in advance,
Alex (DM5AX)
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] USRP / LFTX controlling I/O pins,
Faschingbauer, Alexander <=