[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] USRP2 spontaneously dies while transmitting
From: |
Andrew Lutomirski |
Subject: |
[Discuss-gnuradio] USRP2 spontaneously dies while transmitting |
Date: |
Tue, 4 Aug 2009 16:38:56 -0400 |
Hi all-
Occasionally, while transmitting, my USRP2 will die -- that is, it
stops reliably transmitting and then it drops off the network and
doesn't come back until restarted. Any ideas? I'm running some
vaguely recent firmware, but I've also seen this problem with the
version from the factory.
(This is one of the beta units, which is supposed to be identical to
the modern version for these purposes.)
Here's what triggered it most recently:
$ tx_samples -i 20 -r -I /data/cal_signal
Failed to enable realtime scheduling
usrp2: failed to enable realtime scheduling
Daughterboard configuration:
baseband_freq=0.000000
duc_freq=0.000000
residual_freq=0.000000
inverted=no
^C
$ tx_samples -i 20 -r -I /data/cal_signal
Failed to enable realtime scheduling
terminate called after throwing an instance of 'std::runtime_error'
what(): No USRPs found on interface eth0
Aborted
$ tx_samples -i 20 -r -I /data/cal_signal
Failed to enable realtime scheduling
terminate called after throwing an instance of 'std::runtime_error'
what(): No USRPs found on interface eth0
Aborted
Thanks,
Andy
- [Discuss-gnuradio] USRP2 spontaneously dies while transmitting,
Andrew Lutomirski <=
Re: [Discuss-gnuradio] USRP2 spontaneously dies while transmitting, Eric Blossom, 2009/08/04