[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP2 Is Now Available
From: |
Bob McGwier |
Subject: |
Re: [Discuss-gnuradio] USRP2 Is Now Available |
Date: |
Fri, 29 May 2009 18:11:46 -0400 |
User-agent: |
Thunderbird 2.0.0.21 (Windows/20090302) |
Congratulations Matt!
Matt Ettus wrote:
John Ackermann N8UR wrote:
Are there any significant hardware differences between the beta and
production units? If so, can the betas be reworked to production
status?
Most of the small list of changes were in layout and are not user
visible. The only change of note is that two of the clocks swapped
pins on the clock generator, but this is all handled in the standard
firmware.
The reasons for the longer than expected beta period:
- Software -- We wanted to make sure all the daughterboards were
properly supported, and there were some ethernet throughput issues in
the host drivers that we wanted to address. Everything works now.
- Hardware -- We got uncomfortably low yields on the first 2 batches
of boards and needed to figure out the cause. It turned out that the
problems were with a couple of our vendors, but it took a long time to
figure out the root cause. We have corrected it, and neither of those
vendors will ever be used again. Note that this did NOT affect any
boards shipped to customers, which were all very thoroughly tested.
- Long lead times for parts -- Once we were ready to go ahead and
build more boards, some parts we had a "hold" on had been mistakenly
released to a different customer, and we had to wait 10 weeks for
replacements.
Matt
--
(Co)Author: DttSP, Quiktrak, PowerSDR, GnuRadio
Member: ARRL, AMSAT, AMSAT-DL, TAPR, Packrats,
NJQRP, QRP ARCI, QCWA, FRC.
"You don't need to see the whole staircase, just
take the first step.", MLK.
Twitter:rwmcgwier
Active: Facebook,Myspace,LinkedIn