[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] GNU Radio 3.2 Release Candidate 2 available for
From: |
Karthik |
Subject: |
Re: [Discuss-gnuradio] GNU Radio 3.2 Release Candidate 2 available for testing |
Date: |
Fri, 17 Apr 2009 19:04:25 -0700 |
On Tue, Apr 14, 2009 at 3:23 PM, Johnathan Corgan
<address@hidden> wrote:
> GNU Radio 3.2 release candidate 2 is now available for download and testing:
>
> http://gnuradio.org/releases/gnuradio/gnuradio-3.2rc2.tar.gz
> http://gnuradio.org/releases/gnuradio/gr-howto-write-a-block-3.2rc2.tar.gz
>
> The associated firmware and FPGA bitstream images for the USRP2 are:
>
> http://gnuradio.org/releases/usrp2-bin/release/txrx_edk10.1_r3.2rc2.bin
> http://gnuradio.org/releases/usrp2-bin/release/u2_rev3_ise10.1sp3_r3.2rc2.bin
>
> This release contains all the features, fixes, and bugs of the GNU
> Radio development trunk as of 4/14/09.
>
> Our goal is for this to be the last release candidate before the
> formal 3.2 release. Those of you with your own GNU Radio projects
> who wish to stabilize on the 3.2.x API should begin using the above
> instead of the development trunk. We will be making changes to the
> trunk software that will break API compatibility soon after the formal
> release.
>
> As always, we will maintain the 3.2.x series of releases such that
> upgrades to newer releases will not break existing code. In addition,
> to the extent possible, we will merge and release selected
> functionality from the development trunk that is consistent with this
> requirement.
>
> Johnathan Corgan
> Corgan Enterprises LLC
Here is my setup:
OS: Ubuntu 8.04
USRP1 with 2 LFRX and 2LFTX daughterboards
I primary use the USRP as a 4 channel Digitizer and have been running
gnuradio-3.1.3 without any problems so far. To test 3.2rc2 I tried
running the multi_fft.py which is available in the
gnuradio-examples/python/multi-antenna/ directory. I commented out the
portion which checks for the the number of channels available and the
daughterboard ID since I didn't have the BASIC_RX. Here is the major
change that I found.
The value of len(self.subdev) = 4 in 3.1.3 and =6 in 3.2rc2.
Shouldn't this be 4 as it was previously?
Regards,
Karthik
Re: [Discuss-gnuradio] GNU Radio 3.2 Release Candidate 2 available for testing, Jan Schiefer, 2009/04/30