[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP 2 Daughter Cards
From: |
'Eric Blossom' |
Subject: |
Re: [Discuss-gnuradio] USRP 2 Daughter Cards |
Date: |
Thu, 19 Feb 2009 11:24:16 -0800 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
On Thu, Feb 19, 2009 at 01:21:37PM -0500, jim graham wrote:
> Eric
>
> We are using Fedora Linux version 7 on an x86 machine.
OK.
[Please be sure to hit Reply-All to reply to the writer and the list.]
> The GNU radio software is Revision 10211 (jcorgan)
> Last change date 1/12/2009
>
> We have the USRP 2 connected to a directional antenna. I have used the
> dbs daughtercard hooked to the same antenna with a USRP 1 to verify
> a signal is present.
>
> For the dbs and lfrx daughtercards are the set_center_freq outputs of 0 for
> Baseband freq and -commanded freq for ddc freq correct?
> The output of the call using a flex1800 daughtercard is different.
What rx_daughterboard_id() does the USRP2 report for your RFX 1800?
With regard to RFX boards, the USRP2 only supports the MIMO_B version.
Any board that the firmware doesn't recognize is treated as a Basic Rx
or Basic Tx.
Eric