[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] UDP do not work correctly
From: |
feldmaus |
Subject: |
[Discuss-gnuradio] UDP do not work correctly |
Date: |
Fri, 13 Feb 2009 14:15:47 +0000 (UTC) |
User-agent: |
Loom/3.14 (http://gmane.org/) |
Hi Gnuradio People, :-)
I tried to get the <UDP sink> and <UDP source> to work.
But it didn't work as it should. The FFT Plots only
shows a white screen. The CPU of my Work PC is under
100% and my Server PC too. Should this be a Problem of
<threads> ?
I have a network traffic between the connected pc's with
about 300Kbyte/s.
Do you have any hints for me?
Specification:
Work PC:
+ IP 194.94.26.158
+ Firewall with open UDP Port 13130:13133
Server PC:
+ IP 192.168.111.67
+ Firewall with open UDP Port 13130:13133
The Firewall was tested with <nmap -p 13130-13133 -sU IP-ADRESS>.
So i created a Flow Graph:
#######################################################
###SERVER PC###
[SIN Source]--\ /-->[USRP Sink]
+-->+
[COS SOURCE]--/ \-->[UDP Sink 1]
SETTINGS for UDP Sink 1:
Local IP Address: 192.168.111.67
Port: 13130
Remote IP Address: 194.94.26.158
Port: 13132
[USRP Source]-->[UDP SINK 2]
SETTINGS for UDP Sink 1:
Local IP Address: 192.168.111.67
Port: 13131
Remote IP Address: 194.94.26.158
Port: 13133
###WORK PC###
[UDP Source1]-->[FFT Plot TX]
SETTINGS for UDP Source1:
IP Address: 194.94.26.158
Port: 13132
[UDP Source2]-->[FFT Plot RX]
SETTINGS for UDP Source2:
IP Address: 194.94.26.158
Port: 13133
#######################################################
Regards Markus
- [Discuss-gnuradio] UDP do not work correctly,
feldmaus <=