[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Implementing the USRP1 in another platform
From: |
Jeff Brower |
Subject: |
Re: [Discuss-gnuradio] Implementing the USRP1 in another platform |
Date: |
Thu, 05 Feb 2009 11:36:13 -0600 |
Pablo-
> The exact question is: Were, in the python code of the GnuRadio core,
> can I insert the Driver that i mention? I am reading the python code
> but i can not find were the code read/send data to the USB (to
> substitute it with the PCI control code). The other question is were
> in the Verilog Code can I insert the PCI interface control.
The better approach is to run USB to your board and PCI to the host PC. Then
the
problem is reduced to a PCI driver substitute under GNU Radio -- basically a
patch.
A medium-complexity FPGA on the board can handle this.
If the board also supports GbE interface, then the same approach works for
USRP2.
-Jeff