[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] GNURADIO 64 QAM 200 MHZ
From: |
Eric Blossom |
Subject: |
Re: [Discuss-gnuradio] GNURADIO 64 QAM 200 MHZ |
Date: |
Wed, 28 Jan 2009 13:57:49 -0800 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
On Tue, Jan 27, 2009 at 02:57:04AM -0800, didem colak wrote:
> Hi all,
>
> I want to configure USRP with Basic TX and Basic RX daughter boards using GNU
> Radio.
>
> I am not sure their capabilities are convenient for VHF 200 MHz and 64 QAM
> transmission.
The DACs run at 128MS/s, thus there's a "fold" at 64MHz. There's an
image in the 4rd Nyquist zone that you might be able to use, but 200 MHz
is pretty close to 3fs/2 (192MHz). If you're a bit above 200M you
this can probably be made to work. You'd need a bandpass filter to
suppress the other images. If you've got access to a spectrum
analyzer, just fire it up and see what you get.
> If they are suitable , which python or C++ programs can I useĀ as examples for
> writing new program?
There's python code in
gnuradio-core/src/python/gnuradio/blks2impl/qam*.py that's probably
usable for a transmitter.
Eric