[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Usrp2 Fpga Synthesis Question - Ucf related
From: |
Eric Blossom |
Subject: |
Re: [Discuss-gnuradio] Usrp2 Fpga Synthesis Question - Ucf related |
Date: |
Fri, 19 Dec 2008 06:30:46 -0800 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
On Wed, Dec 17, 2008 at 06:19:09PM -0500, address@hidden wrote:
> Hi,
>
> I've recently started looking at the Spartan3 ISE projects.? I started trying
> to re-synthesize the ISE projects, while using the "u2_rev3.ucf" file, I
> realized that I had to enable the "Allow Unmatched LOC Constraints" option,
> which seems okay since some declared signals might be used.? However I also
> had to comment out the following signals from it
>
> #NET "clk_to_mac" TNM_NET = "clk_to_mac";
> #TIMESPEC "TS_clk_to_mac" = PERIOD "clk_to_mac" 8 ns HIGH 50 %;
>
> #NET "clk_fpga_p" TNM_NET = "clk_fpga_p";
> #TIMESPEC "TS_clk_fpga_p" = PERIOD "clk_fpga_p" 10 ns HIGH 50 %;
>
> #NET "cpld_clk" TNM_NET = "cpld_clk";
> #TIMESPEC "TS_cpld_clk" = PERIOD "cpld_clk" 40 ns HIGH 50 %;
>
> #NET "GMII_RX_CLK" TNM_NET = "GMII_RX_CLK";
> #TIMESPEC "TS_GMII_RX_CLK" = PERIOD "GMII_RX_CLK" 8 ns HIGH 50 %;
>
> #NET "ser_rx_clk" TNM_NET = "ser_rx_clk";
> #TIMESPEC "TS_ser_rx_clk" = PERIOD "ser_rx_clk" 10 ns HIGH 50 %;
>
> #NET "cpld_clk" CLOCK_DEDICATED_ROUTE = FALSE;
>
> I looked for the signals to see if they're used in any of the verilog files,
> I saw them instantiated but never used I'm also assuming that the "clk_fpga"
> signal is the main FPGA clock.? Since the signals I commented out are clocks,
> did I just do something wrong and the project supposed to synthesize without
> this modification.? Or are my change wrong?
>
> Thanks in advance,
> Al Fayez
You shouldn't have to change anything. We build from the command line
using the Makefile in usrp2/fpga/top/u2_rev3/Makefile.
Eric