[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Can't transmit from USRP2
From: |
Johnathan Corgan |
Subject: |
Re: [Discuss-gnuradio] Can't transmit from USRP2 |
Date: |
Fri, 14 Nov 2008 07:58:31 -0800 |
On Fri, Nov 14, 2008 at 7:14 AM, Mattias Kjellsson <address@hidden> wrote:
> Today I updated gnuradio to current svn9988. And while doing that I also
> downloaded the binary package of mb-gcc and built the firmware- files,
> successfully thanks to the wiki and a well known search- engine.
You will also need to either build or download the FPGA firmware.
> The new firmware was loaded onto the sd- card successfully(?) is there
> supposed to be some output from u2_flash_tool, I can't locate the source for
> it, so I can't check for myself.
There is no output upon success. You can re-run the same command, but
use -v instead of -w to verify the SD card contents match the file you
copied into it.
-Johnathan
- [Discuss-gnuradio] Can't transmit from USRP2, Matigakis Emmanouil, 2008/11/03
- Re: [Discuss-gnuradio] Can't transmit from USRP2, Johnathan Corgan, 2008/11/03
- RE: [Discuss-gnuradio] Can't transmit from USRP2, Matigakis Emmanouil, 2008/11/03
- Re: [Discuss-gnuradio] Can't transmit from USRP2, Mattias Kjellsson, 2008/11/14
- Re: [Discuss-gnuradio] Can't transmit from USRP2, version2., Mattias Kjellsson, 2008/11/14
- Re: [Discuss-gnuradio] Can't transmit from USRP2,
Johnathan Corgan <=
- RE: [Discuss-gnuradio] Can't transmit from USRP2, Matigakis Emmanouil, 2008/11/15
- Re: [Discuss-gnuradio] Can't transmit from USRP2, Matt Ettus, 2008/11/17