[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Running usrp2_wfm_rcv.py
From: |
Catalin LACATUS |
Subject: |
[Discuss-gnuradio] Running usrp2_wfm_rcv.py |
Date: |
Thu, 13 Nov 2008 08:48:02 -0500 |
Hello,
-I tried to run usrp2_wfm_rcv.py to test my USRP2 with a BasicRX board and I got the following error.
¨AttributeError: 'usrp2_source_32fc_sptr' object has no attribute 'adc_rate'¨
-After I set the adc_rate=100e6, I got the following error:
AttributeError: 'usrp2_source_32fc_sptr' object has no attribute 'daughterboard_id'
-Testing ./find-usrps script is running fine with following result.
00:50:c2:85:30:0a hw_rev = 0x0300
My configuration is
-Ubuntu 8.04, with the latest svn (7 days old)-USRP2 with a BasicRX
- I am using Netgear Gigabit switch to connect to fast Ethernet port on my laptop. I could not directly connect my Gigabit PCMCIA card to USRP2.
Please let me know how I can fix the error AttributeError: 'usrp2_source_32fc_sptr' object has no attribute 'daughterboard_id'
Thank you,
-Catalin
- [Discuss-gnuradio] Running usrp2_wfm_rcv.py,
Catalin LACATUS <=