[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] USRP2 SD Card rewrite
From: |
Robert McGwier |
Subject: |
[Discuss-gnuradio] USRP2 SD Card rewrite |
Date: |
Sun, 2 Nov 2008 19:01:59 -0500 |
On October 25 Matt wrote:
" Build the firmware by running make in the gnuradio/usrp2 directory
Insert the SD card into the card reader, and the card reader into a
USB port on your computer
Run "sudo u2_flash_tool --dev=/dev/XXXX -t s/w
usrp2/firmware/txrx.bin -w"
/dev/XXXX has to be replaced with the device for the SD card
"
This needs some small corrections I think.
The correct instructions seem to be
cd usrp2/firmware
Run "sudo ./u2_flash_tool --dev=/dev/XXXX -t s/w ./apps/txrx.bin -w"
with the rest which I emphasize again. If you get the wrong XXXX for
the device, you can wipe out your hard drive. Most people will have
their hard drive as /dev/sda and on my computer it seems the device
is, like Matt's computer, to be /dev/sdb.
Bob
- [Discuss-gnuradio] USRP2 SD Card rewrite,
Robert McGwier <=