[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Discuss-gnuradio] SDR platform other than usrp with gnuradio
From: |
Bob McGwier |
Subject: |
RE: [Discuss-gnuradio] SDR platform other than usrp with gnuradio |
Date: |
Sat, 19 Jul 2008 06:29:47 -0400 |
Look at gr-msdd6000 and you will see how an IP based device was interfaced
to gr. You device will need different controls of course but it should
definitely give you a helping start. UDP is the chosen transfer mechanism
but TCP is also supported.
Bob
ARRL SDR Working Group Chair
Member: ARRL, AMSAT, AMSAT-DL, TAPR, Packrats,
NJQRP, QRP ARCI, QCWA, FRC.
"Trample the slow .... Hurdle the dead"
-----Original Message-----
From: address@hidden
[mailto:address@hidden On Behalf Of
Anand Prabhu Subramanian
Sent: Friday, July 18, 2008 4:52 PM
To: address@hidden
Subject: [Discuss-gnuradio] SDR platform other than usrp with gnuradio
Hello,
I am currently working on a custom made SDR platform and trying to use gnu
radio to program it. I understand that I need to write seperate source and
sink blocks to receive and send I/Q samples from and to the device. I was
wondering if anybody in the list could help me in understanding how to
write these block. I suspect I would need to write something similar to
the usrp code. Can you please let me know a starting point on how to write
these blocks? The device I am currently using interfaces with the host
using ethernet and sends/receives base band I/Q samples.
Are there documentations on interfacing gnuradio to SDR platforms other
than usrp. It would be very helpful if you could give some pointers.
-Anand
============================================
Anand Prabhu Subramanian
Wireless Networking and Simulation Lab (WINGS)
State University of New York, Stony Brook
http://www.wings.cs.sunysb.edu/~anandps
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio