|
From: | zhifeng chen |
Subject: | Re: [Discuss-gnuradio] Storing A/D samples in memory......... |
Date: | Thu, 19 Jul 2007 02:07:31 -0400 |
On Jul 18, 2007, at 4:53 PM, Kshitij Kumar Singh wrote:
> As a part of some research work on cooperative communications in
> wireless networks, I had decided to use
> the USRP as one the of my implementation platforms. I used the
> tutorials by D. Shen as a reference. There are, however , some
> specific problems I need help with :
> ----------------------------------------------------------------------
> -----------------
> I need to store the received signal A/D samples (before all the
> post-demod processing stuff takes place) in memory and to
> correlate them with similar samples stored somewhere else in memory.
do you want the raw A/D samples? this would have to be a hardware
solution (pinout to the FPGA). However, If you just want the samples
that are coming across the USB (these samples have been decimated and
filtered) , then you can do a simple write to a file
fg = gr.flow_graph()
src = "">snk = gr.file_sink_c(...)
fg.connect(src,snk)
then you can do what you want with the data offline
> Once this initial processing is done, I can move on to the demod
> part. The sample storage/correlation part is where I am
> getting stuck time and again. Is there some specific block I am
> going to need or do I need to write my own signal processing block
> from scratch?
> I tried looking in the mailing list archives but
> couldn't find anything similar. Kindly point to any suitable
> reference on this topic I may have overlooked.
> ---------------------------------
>
> Sincerely,
> Kshitij
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |