[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Problems with Mueller & Mueller clock recovery; not v
From: |
Christian Sokolowski |
Subject: |
[Discuss-gnuradio] Problems with Mueller & Mueller clock recovery; not very reliable in my system |
Date: |
Wed, 04 Jul 2007 14:17:22 +0200 |
User-agent: |
KMail/1.9.5 |
Hi,
I have some trouble using the function gr_clock_recovery_mm_cc.cc (Mueller &
Mueller Clock recovery). Using DPSK with
datarate 40 kbps, the communication system works perfect running a simulation
without USRP board. The problem occurs when I switch to the board: when
calling/initialising the receiver client of the system, in approximately 70%
of the cases the following error message shows up.
scipio:/home/cso/da # ./mdpsk_rx_rrc_client_thread.py
>>> gr_fir_ccf: using SSE
Using RX d'board A: Flex 400 Rx MIMO B
python: gri_mmse_fir_interpolator_cc.cc:66: gr_complex
gri_mmse_fir_interpolator_cc::interpolate(const gr_complex*, float):
Assertion `imu >= 0' failed.
Aborted
Once the clock is synchronised (the other 30% cases), the receiver works
fine. The problem is 'temporarely' solved by unplugging the DC power supply
of the board. Is it possible that some buffers on the hardware remain filled
from former runs on the board?
I am calling the M&M clock recovery with the following parameters:
clock_sync = gr.clock_recovery_mm_cc(self.sw_decim, 0.25*0.009, 0.5, 0.03,
0.002)
parts of gri_mmse_fir_interpolator_cc.cc, which is called by
gr_clock_recovery_mm_cc.cc:
gr_complex
gri_mmse_fir_interpolator_cc::interpolate (const gr_complex input[], float mu)
{
int imu = (int) rint (mu * NSTEPS);
assert (imu >= 0);
assert (imu <= NSTEPS);
gr_complex r = filters[imu]->filter (input);
return r;
}
I expect that "assert(imu >=0);" is not very robust for synchronising the
signal for some unknown reason.
thanks for any help.
Chris
---------------------------------------------------------------------
Christian Sokolowski Office: +49(0)-240-7575-7043
RWTH Aachen FAX: +49(0)-240-7575-7050
Wireless Networks Dept
Kackertstrasse 9 E-mail: address@hidden
D-52072 Aachen Web: http://www.mobnets.rwth-aachen.de
---------------------------------------------------------------------
- [Discuss-gnuradio] Problems with Mueller & Mueller clock recovery; not very reliable in my system,
Christian Sokolowski <=