[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Re: Re: Re: Tx Path
From: |
Anmar |
Subject: |
[Discuss-gnuradio] Re: Re: Re: Tx Path |
Date: |
Fri, 20 Apr 2007 20:26:25 +0200 |
Eric Blossom wrote:
> On Wed, Apr 18, 2007 at 01:49:36PM +0200, Anmar wrote:
>
> You can control the phase in the FPGA. However, we're using the
> digital upconverter in the AD9862. That DUC has its own phase
> register.
Loading the code below, I connected the two daughterboard’s to the X and
Y channel of the scoop. every time I load the code I get a different
angel on the scoop(but there is a constant change with it). how can I
explain why this is happening?
def main():
interp = 128
waveform_type = gr.GR_COS_WAVE
waveform_ampl = 16000
waveform_freq1 = 40e3
waveform_freq2 = 10e3
waveform_offset = 0
fg = gr.flow_graph ()
sink = usrp.sink_c (0, interp)
sink.set_nchannels(2)
sink.set_mux(0xba98)
usb_freq = sink.dac_freq() / interp
siggen1 = gr.sig_source_c (usb_freq,
gr.GR_SIN_WAVE,
waveform_freq1,
waveform_ampl,
waveform_offset)
siggen2 = gr.sig_source_c (usb_freq,
gr.GR_SIN_WAVE,
waveform_freq2,
waveform_ampl,
waveform_offset)
inter = gr.interleave(gr.sizeof_gr_complex)
fg.connect (siggen1, (inter, 0))
fg.connect (siggen2, (inter, 1))
fg.connect (inter, sink)
fg.start()
raw_input('Press enter to stop\n')
fg.stop()
if __name__ == '__main__':
main()
thanks
anmar
> Eric
--
Posted via http://www.ruby-forum.com/.
- [Discuss-gnuradio] Tx Path, Anmar Abdelaziz, 2007/04/13
- Re: [Discuss-gnuradio] Tx Path, Brian Padalino, 2007/04/13
- [Discuss-gnuradio] Re: Tx Path, Anmar, 2007/04/17
- Re: [Discuss-gnuradio] Re: Tx Path, Eric Blossom, 2007/04/17
- Re: [Discuss-gnuradio] Re: Tx Path, Eric Blossom, 2007/04/17
- [Discuss-gnuradio] Re: Re: Tx Path, Anmar, 2007/04/18
- Re: [Discuss-gnuradio] Re: Re: Tx Path, Eric Blossom, 2007/04/18
- [Discuss-gnuradio] Re: Re: Re: Tx Path,
Anmar <=
- Re: [Discuss-gnuradio] Re: Re: Re: Tx Path, Eric Blossom, 2007/04/20
- [Discuss-gnuradio] Re: Re: Re: Re: Tx Path, Anmar, 2007/04/23
- Re: [Discuss-gnuradio] Re: Re: Re: Re: Tx Path, Roshan Baliga, 2007/04/23
- [Discuss-gnuradio] Re: Re: Re: Re: Re: Tx Path, Anmar, 2007/04/25