[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Re: Mode S and ADS-B
From: |
Martin Dvh |
Subject: |
Re: [Discuss-gnuradio] Re: Mode S and ADS-B |
Date: |
Sun, 15 Apr 2007 21:58:35 +0200 |
User-agent: |
Debian Thunderbird 1.0.2 (X11/20070113) |
Eric A. Cottrell wrote:
> Martin Dvh wrote:
>
>>Cory Papenfuss wrote:
>>
>>>>I have a digital-wip branche which is work in progress for digital QAM
>>>>stuff
>>>>and
>>>>general-wip which is my work in progress for general gnuradio things
>>>>(latest addition is gr-cxadc, a driver for cx2388x capture cards to
>>>>use as a general purpose high-speed ADC frontend as a cheap
>>>>alternative for
>>>>an USRP)
>>>>
>>>>Greetings,
>>>>Martin
>>>>
>>>
>>> Has there been some progress on that front then? I've been lurking
>>>here for awhile, but last time I looked into this I don't think the TV
>>>-capture cards were viable. The BT8xx chips still have holes in the
>>>data, right? CX2388x can stream baseband without VBI holes?
>>
>>Yes they can.
>>
>>Look in the mailinglist for TV card SDR:
>>http://lists.gnu.org/archive/html/discuss-gnuradio/2007-04/msg00134.html
>>http://lists.gnu.org/archive/html/discuss-gnuradio/2007-04/msg00042.html
>>
>>How Chee page on this:
>>http://www.geocities.com/how_chee/cx23881fc6.htm
>>My page on this:
>>http://www.olifantasia.com/projects/gnuradio/mdvh/cx2388x/cxadc/
>>
>>SVN files are in
>>http://gnuradio.org/trac/browser/gnuradio/branches/developers/nldudok1/general-wip
>>cxadc is the kernel driver
>>gr-cxadc is the gnuradio driver/glue
>>gnuradio-examples/cxadc are the example scripts
>>
>
> Hello,
>
> What are the sampling rates for these cards? Can they go up to 8 or 10
> MSPS? If so I might be able to try them out with Mode S.
You could try them out.
Standard is 28.63636.0 MSPS which is normally converted using a built-in
samplerateconverter to 27 MSPS.
(The samplerateconversion is configurable but this is not implemented in the
driver yet)
So you can capture up to 14 Mhz wide signals.
I "overclocked" mine to run at 32.0 MSPS to be able to use a tuner with a 44
Mhz IF freq.
(with 28.63636 MSPS you have a niquist boundary at 42.95 Mhz which is right in
the 40 - 48 Mhz bandpass of the 44 Mhz IF)
You must also know that the ADC is 10 bits of which you standard only get the
high 8 bits, so you don't have a very high dynamic range.
(using some tricks it should be possible to get the full 10 bits at halve the
samplingrate)
I must say this is still work-in-progress quality.
A lot of these tv-cards do not have a tuner with a suitable IF-output (if any)
or only a "narrow-band" 200 kHz If at 10.7 MHz.
The IF-output level usually also is much too low (1 to 100 mv) for the
video-input (1 V) to use the complete dynamic range. Amplification needs
top be added to get better sensitivity and dynamic range.
To have the most fun, you also really want a tuner with a 8 Mhz wide IF at the
right IF-freq.
For now I get the best results when using an external microtune tuner with a
5.75 Mhz IF.
I am working on getting the built-in thomson tuner of my pcHDTV3000 cx2388xx
tv-card usable.
So the main work ahead is finding out which tuners are suitable, how to connect
them to the video-input (amplification) and how to tune them.
The end-product will not be equivalent to an usrp but it will be a low-budget
way to do SDR with gnuradio on quite a broad frequency range.
(0-50 Mhz using direct sampling and 50-860 Mhz using tuner)
If there is interest I am willing to supply premodified cards with the tuner
replaced with a suitable model.
(As soon as we have a good working setup)
Greetings,
Martin
>
> 73 Eric
>