[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] How to reset USRP hardware via GNURadio
From: |
George Barrinuevo |
Subject: |
Re: [Discuss-gnuradio] How to reset USRP hardware via GNURadio |
Date: |
Thu, 12 Apr 2007 18:07:01 -0700 (PDT) |
Eric,
I will try the 2 ctl-c method. Also, is there a
software reset command in GNURadio to recover from any
corruption? This can be a software initiated reboot
of the USRP or something similar.
Thanks,
--- Eric Blossom <address@hidden> wrote:
> On Thu, Apr 12, 2007 at 02:03:11PM -0700, George
> Barrinuevo wrote:
> > I get strange results running my block. To
> resolve
> > this problem, I must unplug the DC power from the
> USRP
> > for 3 seconds and plug it back in. Is there a
> > GNURadio, C++, PYTHON command to reset the USRP
> > hardware so that I do not have to a hard power
> down
> > and up?
> >
> > I probably get these issues since ctl-c does not
> work
> > to cancel the GNURadio python code and therefore I
> > must use 'kill -9' instead which probably causes
> the
> > issue described above.
> >
> > Thanks,
> >
> > George Barrinuevo
> > address@hidden
>
> Try two control-C's
>
> Eric
>
George Barrinuevo
address@hidden