[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Q from a novice user in Japan
From: |
Mamoru Yamamoto |
Subject: |
Re: [Discuss-gnuradio] Q from a novice user in Japan |
Date: |
Tue, 28 Nov 2006 22:20:21 +0900 |
Mr. Berndt,
I tried the same. Running epydoc against /usr/local/lib.../gnuradio
failed. That looked very close to the end, and must have generated
a good package of manual HTMLs of everything. I hope someone can
fix the problem.
After this fail, I tried to run it for each package of
gnuradio-core, and gr-usrp. This was successful. Specifying
the directory name was sometimes successful. If not,
I specified like ".../*.py". I do not know this is the
correct way or not. I experienced several errors in the
process. But generated HTMLs look useful enough.
Regards,
Mamoru Yamamoto
>G'day,
>
>I've also built epydoc 3.0alpha3 and tried to generate documentation run
it
>against ${PYSITELIB}/gnuradio. It produced a lot of documentation but it
>failed prior to finishing. There were a lot of warnings and the process
>failed in wxgui.
>
>If someone was successful in completing the conversion, perhaps it may
be a
>good idea to make the documentation available as a package. I certainly
would
>appreciate it.
>
>Thanks,
>
>cheerio Berndt
>
>
>On Tuesday 28 November 2006 04:01, Mamoru Yamamoto wrote:
>> Dear Colleagues,
>>
>> Yesterday I re-installed the "epydoc" from the subversion
>> repository of epydoc, and tried formatting the GNUradio
>> python libraries. epydoc version would be 3.0, I suppose.
>>
>> The result was much better than before. Though I met
>> some errors, I could generate useful HTMLs with which I can
>> browse python functions. Thanks for Eric's suggestion.
>>
>> I also learned that after "import" any module in python,
>> we can show its help information by typing "help(module)".
>> Sorry I am too ignorant to this software package.
>>
>> Regards,
>>
>> ----
>> Mamoru Yamamoto address@hidden
>>
>> >Eric,
>> >
>> >Thank you for your answer.
>> >
>> >For our applicaion 150MHz and 400MHz receivers must synchronize
>> >very precisely. I cannot use TV RX for this reason. Is the
>> >frequency 150MHz too high for Basic RX board? We may need
>> >to add more amplifiers between the antenna and the USRP.
>> >
>> >Thank you very much for the information of "epydoc".
>> >I installed ver 2.1 from yum (Fedore Core 4), and run it.
>> >But as other E-mail says, I got many errors. It created
>> >some results, but I do not know if they are very useful
>> >or not... Should I use Ver 3.0 of the epidoc?
>> >
>> >Regards,
>> >
>> >Mamoru Yamamoto
>> >
>> >>On Thu, Nov 09, 2006 at 03:30:28AM +0900, Mamoru Yamamoto wrote:
>> >>> Dear GNUradio experts,
>> >>>
>> >>> I am very new to GNUradio. I am in Kyoto University, Japan
studying
>> >>> ionosphere by using radar and other techniques. I am interested
>> >>> in developing a 150/400MHz beacon receiver with GNUradio + USRP.
>> >>> Now I have a USRP base board + Basic RX + Flex 400 for this
purpose.
>> >>
>> >>OK.
>> >>
>> >>A TV RX daughterboard might be a better choice for the 150 MHz
beacon.
>> >>
>> >>> I have some questions.
>> >>>
>> >>> --- How I can get information on Python functions?
>> >>> Documents generated by "doxygen" explain only
>> >>> C++ part of the software. (Am I correct?)
>> >>> To know Python functions, do I need to read through
>> >>> codes? I would like to know if there is a list
>> >>> or man-pages of such Python functions. My application
>> >>> may not require any new C++ coding.
>> >>
>> >>You could run epydoc on the python code in and under gnuradio-
>>
>> core/src/python.
>>
>> >>Most of the code has epydoc doc strings.
>> >>
>> >>> --- I learned GNUradio and USRP from network very much.
>> >>> Thank you very much. But informations are very much
>> >>> scattered. Don't you have a plan of GNUradio (plus USRP)
book?
>> >>
>> >>We've thought about it. Thanks for the words of encouragement.
>> >>
>> >>> Thanks for your help. Regards,
>> >>>
>> >>> Mamoru Yamamoto address@hidden
>> >>
>> >>You're welcome.
>> >>
>> >>Eric
>> >
>> >----
>> >Mamoru Yamamoto address@hidden
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>