[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Re: USRP Success??
From: |
Matt Ettus |
Subject: |
[Discuss-gnuradio] Re: USRP Success?? |
Date: |
Thu, 17 Feb 2005 09:32:17 -0800 |
User-agent: |
Internet Messaging Program (IMP) 4.0-cvs |
Quoting "Robert W. McGwier" <address@hidden>:
> n4hy:/usr/local/GnuRadio/gnuradio-examples-0.3/python/usrp # ./usrp_fft.py
> usrp: found usrp rev2
> RX d'board A: Invalid EEPROM contents
> RX d'board B: <none>
> uOuOuO
>
> What is the EEPROM error about?
>
> The USRP is found and running. I put the daughter boards on the A side
> as per the photo
> in the USRP Wiki.
The is good. Let me explain the EEPROM thing. There is an EEPROM on the main
USRP which I program before shipping. Each daughterboard has its own EEPROM.
This allows the USRP to determine which daughterboards are installed. I DON'T
program these before shipment, which is why you get that message. You can (and
should) program the EEPROMs by using usrp/host/apps/burn-basic-eeprom
Matt
- [Discuss-gnuradio] Re: USRP Success??,
Matt Ettus <=