[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] usrp wfm problem
From: |
mj |
Subject: |
[Discuss-gnuradio] usrp wfm problem |
Date: |
Wed, 16 Feb 2005 08:27:00 -0800 (PST) |
> >also... '31.3e6' is Radio2 here in the UK on
> 89.8MHz.
> >Is there an easy way to convert ddc into the actual
> >freq?
> >
> The freq is tuned to 5.75Mhz, so you might be
> getting
>
> 89.8 - 64 + 5.75 = 31.55 ?
>
> 64 Mhz is the usrp sample freq. 5.75 is the IF freq
> the script tunes to.
The file I used to grab the Radio2 signal (89.8Mhz)
with was ursp_rx_cfile.py (no 5.75Mhz IF mentioned)
with decim=200, dcc-freq=31.3e6. The wfm_rcv_file.py
was used to recover the audio from the generated dat
file easily.
Now, with wfm_rcv.py working and set to the same
settings as usrp_rx_cfile.py I cannot recover the
audio. I can still see the waveform in usrp_fft.py so
it is still there.
Am i missing something obvious?
Also, the max ddc for usrp_fft.py is 32e6 so i'm
assuming the maximum usrp rf frequency is 32Mhz??? and
the Radio2 wfm reception i'm receiving is some
harmonic. With the standard daughterboard how can i
receive 433MHz for example?
thanks
=====
mj - m0mik
hotstudent.com [are you hot enough?!]
__________________________________
Do you Yahoo!?
Meet the all-new My Yahoo! - Try it today!
http://my.yahoo.com
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] usrp wfm problem,
mj <=