[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Booting a new USRP
From: |
Rahul Dhar |
Subject: |
Re: [Discuss-gnuradio] Booting a new USRP |
Date: |
Fri, 11 Feb 2005 13:15:54 -0500 |
User-agent: |
Mutt/1.5.6i |
Charles,
On Fri, Feb 11, 2005 at 09:57:04AM -0800, cfk wrote:
> Dear Rahul
> The program test_fusb is not installed in the computer's path. I can be
> found
> in ../usrp/host/apps along with several others such as test_usrp_standard_tx
> and test_usrp_standard_rx. In all three cases these programs are invoked by
> navigating to the ../usrp/host/apps directory and typing:
>
> ./test_usrp_standard_tx
>
> The "./" means execute the program in the current directory and not to search
> the computer's path. You can see your path with the command "echo $PATH" from
> a terminal prompt.
As I said, test_fusb isn't anywhere on my hard disk (or find was lying
to me). Anyways, I ran test_usrp_standard_tx and got the following:
TX d'board A: <none>
TX d'board B: <none>
tx_underrun
tx_underrun
tx_underrun
tx_underrun
tx_underrun
xfered 5.37e+08 bytes in 16.8 seconds. 3.2e+07 bytes/sec. cpu time =
1.93
5 underruns
I'm assuming this means the firmware was uploaded properly.. LED0's
blinking rate slowed to about 1 Hz, as expected. However, LED1 doesn't
seem to work. "usrper led1 on" doesn't do anything. "usrper led0 on",
however, makes LED0 turn back on sooner than it should, and it then
resumes blinking at 1 Hz. led0 off does the opposite.
"./usrper 9862a_read 1" also works as expected.
Is there something additional I need to do to get LED1 working?
Thanks,
-Rahul
--
Rahul Dhar
address@hidden
Actually, my goal is to have a sandwich named after me.
pgpOVGtN0G40e.pgp
Description: PGP signature
- Re: [Discuss-gnuradio] Booting a new USRP, (continued)
- Re: [Discuss-gnuradio] Booting a new USRP, Matt Ettus, 2005/02/05
- Re: [Discuss-gnuradio] Booting a new USRP, cfk, 2005/02/05
- Re: [Discuss-gnuradio] Booting a new USRP, Eric Blossom, 2005/02/05
- Re: [Discuss-gnuradio] Booting a new USRP, cfk, 2005/02/05
- Re: [Discuss-gnuradio] Booting a new USRP, Matt Ettus, 2005/02/05
- Re: [Discuss-gnuradio] Booting a new USRP, cfk, 2005/02/05
- [Discuss-gnuradio] Bug in usrper.cc, Berndt Josef Wulf, 2005/02/08
- Re: [Discuss-gnuradio] Bug in usrper.cc, Eric Blossom, 2005/02/08
- Re: [Discuss-gnuradio] Booting a new USRP, Rahul Dhar, 2005/02/11
- Re: [Discuss-gnuradio] Booting a new USRP, cfk, 2005/02/11
- Re: [Discuss-gnuradio] Booting a new USRP,
Rahul Dhar <=
- [Discuss-gnuradio] usrp_oscope.py, cfk, 2005/02/11
- Re: [Discuss-gnuradio] usrp_oscope.py, Eric Blossom, 2005/02/11
- Re: [Discuss-gnuradio] Booting a new USRP, Eric Blossom, 2005/02/11
- Re: [Discuss-gnuradio] Booting a new USRP, John Gilmore, 2005/02/18
- Re: [Discuss-gnuradio] Booting a new USRP, Eric Blossom, 2005/02/18
- Re: [Discuss-gnuradio] Booting a new USRP, John Gilmore, 2005/02/19
- Re: [Discuss-gnuradio] Booting a new USRP, Matt Ettus, 2005/02/19
- Re: [Discuss-gnuradio] Booting a new USRP, Eric Blossom, 2005/02/19
- Re: [Discuss-gnuradio] Booting a new USRP, Eric Blossom, 2005/02/11
Re: [Discuss-gnuradio] FC3 build problems, Chris, 2005/02/04