[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Tuner modules?
From: |
Chuck Swiger |
Subject: |
Re: [Discuss-gnuradio] Tuner modules? |
Date: |
Tue, 30 Nov 2004 08:24:03 -0500 |
At 08:24 PM 11/29/2004 -0800, you wrote:
On Mon, Nov 29, 2004 at 10:20:58PM -0500, James Hall wrote:
> Would these be suitable for Gnuradio use?
>
http://www.windsordistributors.com/onlinestore/index.aspx?tabindex=0&tabid=1&productid=66&directoryid=-1&ctrl=productdetails
> I happened to stumble across them earlier. They're 50 cents/pc but it's a
> min. order of 100.
They might work. In any event you'll need a real data sheet to figure
out how to use them. If you can't get a data sheet I'd pass on them.
FWIW I'm focusing on Tom Huppi's ebay tuners, the Microtune 4707 PH5
3X7827. You can
get a data sheet for the 4706 PH5 (3x8264, 3x8287, 3x8320) which I'm going to
/assume/ is close enough. Have traced one 5vdc pin back to an IC which
means the
other p/s pin must be the 33v. Other than that I'm trying to get an I2C
bus going
to talk to it, plus learn about I2C ;)
--Chuck