[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [certi-dev] Running Portico example under CERTI
From: |
Eric Noulard |
Subject: |
Re: [certi-dev] Running Portico example under CERTI |
Date: |
Tue, 10 Aug 2010 11:41:48 +0200 |
2010/8/9 Eric Noulard <address@hidden>:
> 2010/8/9 Eric Noulard <address@hidden>:
>> 2010/8/9 Ijperen, Jeroen van <address@hidden>:
>
>>
>>> I can say that for RTI1516 this works correctly, and I don't think I
>>> adjusted anything for it...
>>
>> Most probably because your federation is "well-behaving" wrt the RSP service.
>> I'll try a fix for this.
>
> I did just commit a fix for this issue.
> Now we should properly handle the callbacks.
>
> Christoph would you be able to use CERTI CVS and try your test case?
I did update my fix from yesterday because it was incomplete.
Now the example (attached with CMakeLists.txt inside) is running
but fails because of a object unknown.
Frankly it looks like this example is buggy and contains races
(e.g. fed1 may finish and delete object before fed2 had a chance to run)....
So I let you try and investigate if the example is buggy or if CERTI is...
If CERTI is the culprit then I will go on :-)
--
Erk
Membre de l'April - « promouvoir et défendre le logiciel libre » -
http://www.april.org
ExampleFedPortico-0.2.0-Source.zip
Description: Zip archive